Fiber Optic Splice Sleeves

Fiber optic splice sleeves are used on fiber glass joint point during the fiber optic fusion work, usually is after the fibers are melt, people use this splice protection tube on the melt point for further protection, its strengthen member inside the tube will make the fiber joint point stronger and it provide extra protection to the fiber joint point after the fiber optic fusion- it is waterproof and dust proof, and using such splice protection sleeves can reduce possible extra attenuations. Fiber optic protection sleeve is made up of cross linked polyolefin heat-shrinkable tubes, hot melt tubes and Stainless steel needle, which is specifically designed for the protection of fiber optical closure. The types of Fiber Optic Splice Sleeves on our Fiberstore. Single Fiber fiber optic splice sleeve This type of fiber optic protection sleeve is used for protecting and supporting the fusion splice point. Single Fiber fiber optic splice sleeve is with typical 40mm or 60mm length, with stainless steel rod as the strengthen member. Our Single Fiber Optic Splice Sleeves is easy to operate, reducing the risk of fiber damage during installationTransparent tube, it is easy to see the status of fiber optical closure. Ribbon Fiber Optic Splice Sleeves This fiber optic splice sleeves are used for ribbon optical fiber fusion protection, its max capacity is for 12 ribbon fibers. The ribbon fiber optic splice protection sleeves use ceramic components as the strengthen member, the whole splice sleeve typical length is 40mm. We also provide this kind of protection sleeves with 1000pcs/pkg and good price. Welcome contact us. FS-4212: Ribbon Fiber Fusion Splice Protection Sleeves with Ceramic Rod-12 fibers. Fiberstore have ready stock of standard 40mm and 60mm length splice protection sleeves for immediate shipment, and we can make custom length types with fast delivery. Buy fiber optic supplies from Fiberstore with conficence